GARDENMAC
Pruning shear drive kit — pinion, ring gear and moving rack
Duties calculated at checkout
Free express shipping over $119 · 2-5 business days
50 in stock
Show item description
The drive kit brings together the three gears that carry the movement from the motor to the blade: pinion, ring gear of the reducer and moving rack of the opening and closing mechanism.
Replace it when the shear loses cutting force even with a charged battery, when play appears between the blades and they no longer close in line, when the reducer group is noisy, grinds or vibrates, or when the blade jams halfway through its travel. The three gears mesh with each other and wear out together: fitting a new part against two already worn gears ruins the brand-new spare in a matter of hours. Replacing them as a set restores the original mesh and full torque.
The kit costs 10% less than the three spare parts bought separately and arrives in a single shipment. Select your shear model.
Compliance
Suitable for professional and business use. Compliant with Directives 2006/42/EC (Machinery), 2014/30/EU (EMC) and 2011/65/EU (RoHS); CE marking affixed by the manufacturer. Technical documentation held at the Gardenmac registered office.
- RoHS2011/65/UE
- EMC2014/30/UE
- MD2006/42/CE
Safety and compliance
Product and economic operator information, provided under Article 19 of Regulation (EU) 2023/988 on general product safety.
Manufacturer
SWANSOFT Machinery Co., Ltd.
No. 8 Xiaoxing Avenue, Chengdong Town
Haian 226600, China
assistant@swansofttools.com
Responsible person in the European Union
eVatmaster Consulting GmbH
Raiffeisenstr. 2 B11
63110 Rodgau, Germany
contact@evatmaster.com
Responsible person under Article 16 of Reg. (EU) 2023/988.
Importer
Furioso Group S.r.l.s.
Via Civitas Castelromano 11
86170 Isernia (IS), Italy
assistenza@gardenmac.com
Product identification
- Model
- Pruning shear drive kit — pinion, ring gear and moving rack
- Item code
- SW-KIT-TRA-SW718-01
- Marking
- CE
Warnings and safety information
- This is a spare part: check your tool model before you buy.
- Remove the battery from the tool before replacing it and follow the sequence in the manual.
- Blades and chains are sharp even when new: handle them with gloves.
- Fitting incompatible parts makes the tool dangerous and voids the warranty.
Read the user manual before using the tool and keep it for the life of the product: you will find it in the box.
Electrical and electronic equipment: at the end of its life it must not go into unsorted waste. How to dispose of it.
For the EU declaration of conformity and the technical documentation, write to assistenza@gardenmac.com.