GARDENMAC
Pruning shear trigger kit — trigger, spring and ON/OFF switch board
Tax included
Express delivery in 24/48h · €4.99 (free over €99)
50 in stock
Show item description
The trigger kit brings together the three spare parts that make up the shear's cutting control: blade-action trigger, trigger return spring and ON/OFF switch board.
Replace it when the shear no longer switches on or shuts down by itself, when the trigger stays soft and does not return to position after the cut, or when the blades start in fits or do not start at all even with a charged battery. Spring and switch wear out along with the trigger, because they work on every single cut: replacing the whole group avoids opening the handle a second time a few weeks later.
The kit costs 10% less than the three spare parts bought separately and arrives in a single shipment. Select your shear model.
Compliance
Suitable for professional and business use. Compliant with Directives 2006/42/EC (Machinery), 2014/30/EU (EMC) and 2011/65/EU (RoHS); CE marking affixed by the manufacturer. Technical documentation held at the Gardenmac registered office.
- RoHS2011/65/UE
- EMC2014/30/UE
- MD2006/42/CE
Safety and compliance
Product and economic operator information, provided under Article 19 of Regulation (EU) 2023/988 on general product safety.
Manufacturer
SWANSOFT Machinery Co., Ltd.
No. 8 Xiaoxing Avenue, Chengdong Town
Haian 226600, China
assistant@swansofttools.com
Responsible person in the European Union
eVatmaster Consulting GmbH
Raiffeisenstr. 2 B11
63110 Rodgau, Germany
contact@evatmaster.com
Responsible person under Article 16 of Reg. (EU) 2023/988.
Importer
Furioso Group S.r.l.s.
Via Civitas Castelromano 11
86170 Isernia (IS), Italy
assistenza@gardenmac.com
Product identification
- Model
- Pruning shear trigger kit — trigger, spring and ON/OFF switch board
- Item code
- SW-KIT-GRI-SW921-01
- Marking
- CE
Warnings and safety information
- This is a spare part: check your tool model before you buy.
- Remove the battery from the tool before replacing it and follow the sequence in the manual.
- Blades and chains are sharp even when new: handle them with gloves.
- Fitting incompatible parts makes the tool dangerous and voids the warranty.
Read the user manual before using the tool and keep it for the life of the product: you will find it in the box.
Electrical and electronic equipment: at the end of its life it must not go into unsorted waste. How to dispose of it.
For the EU declaration of conformity and the technical documentation, write to assistenza@gardenmac.com.